Plunger Pumps (Pumping Unit)
Plunge,
pump is a compact pump that gives metered amount of lubricant in every
stroke. We can adjust the discharge by adjust screw. Output can very
from 0.05cc to 0.25cc/stroke and delivery pressure 200Kg/cm2
max. The stroke of the plunger remains always same. The mounting htrads
of the plunger is M22 x 1.5. Plunger pump is also available in
0.50cc/stroke. 0.70cc/stroke and 1.6cc/stroke. (Non adjustable).
Progressive
Distributor Blocks
S.P.
Introduce progressive distributor bllocks of PB-4555/PB-6080 series are
meant for distribution of grease/oil delivered by a pump. From this
progressive block get lubricant in sequently one after another. Any one
outlet is blocked then the progressive block will stop functioning with
suitable monitoring devices, this blockages in sensed and suitable
warning is given to avoid running the machine without proper
lubrication. These blocks can be used for intermittent / continuous
lubrication. This block has three type of elements.
- Starting block
- Middle block
- End block
Each
middle block has two outlet and min. 03 middle block are required in
progressive block we can add other middle blocks as per requirement.
|
